Vacuum Lifting Attachments

Vacuum Lifting Attachments - Fork Truck

1 - Fork Mounted Vacuum Plate Lifter
Loading laser, water jet and plasma cutting machines where no overhead lifting is available can be easily achieved using one of our fork mounted plate & sheet lifters. Heavy steel plates, delicate copper foils, aluminium & plastics can all be lifted.
2 - Fork Mounted Vacuum Plate Lifter
Plate and sheet sizes up to 3.25m x 1.25m x 500kgs in weight and metals less than 0.5mm thick are handled quickly. easily & safely. The system is powered by a self contained battery pack and built in charger, hundreds of lifts are possible on a single charge.
3 - Fork Mounted Cladding Panel Vacuum Lifter
Servicing the construction industry, this fork mounted cladding panel lifter is capable of lifting panels 6.0m x 1.2m x 120kgs.
4 - Fork Mounted Cladding Panel Vacuum Lifter
Panels can be powered through 90° from horizontal to vertical and then manually rotated from landscape to portrait.
5 - Fork Mounted Cladding Panel Vacuum Lifter
Controls and warning lights are located in a radio controlled operator pendant unit to be used by the truck driver or an assistant.
6 - Tunnel Cladding Lifter
This fork mounted vacuum lifter was designed to lift and position cement fibre board panels, which form coverings to the A55 Pen-Y-Clip road tunnel in North Wales. The equipment was suspended from a fork mounted boom and facilitated lifting from horizontal to vertical.
7 - Fork Truck Plate Lifter
This horizontal only vacuum lift attachment handles plates 3.0m x 1.4m x 200kgs in weight. Plates can be stacked without the need for packing and without causing edge damage.
8 - Fork Mounted Panel Lifter
Building panels and floor pattern plates 2.5m x 1.25m x 200kgs are handled in conjunction with this pedestrian fork truck. Plates can be tilted from horizontal to vertical.
9 - Low Profile Sheet Vacuum Lifter
Retrieval of metal or plastic sheets from racking and low headroom shelves can be achieved with our low profile fork mounted vacuum beam.
10 - Low Profile Sheet Vacuum Lifter
The depth of the vacuum frame is less than 150mm making the device ideal for reaching between shelves.
11 - Vacuum Door Manipulator
This fork mounted vacuum device allows heavy steel doors weighing 100kgs to be lifted from flat and induced into the vertical.. see next photo>
12 - Vacuum Door Manipulator
Once vertical, the door can be rotated from landscape to portrait. The system is 12volt battery powered with all motions operated by push button control.
Fork Mounted Vacuum Lifting Attachments
Vacuum lifting attachments for fork lift trucks, reach & pedestrian fork loaders are available for sheet and plates, concrete slabs, drums and many other types of load.

Click each thumbnail image to view.