Panel & Board Lifters
1 - Porous Board Vacuum Lifter
This vacuum lifting beam is designed specially for handling resin impregnated boards up to 3.8m x 2.4m weighing 100kgs. Vacuum pad assemblies are adjustable enabling smaller sizes and profiled pieces to be handled.
2 - 90 ° Power Tilt Cladding Lifter
Designed to lift plywood and metal faced cladding panels 4.5 metres long x 4 metres high weighing 200kgs.. This vacuum lifter is fitted with telescopic arms and swivelling pads to enable the lifting of panels with many door and window combinations.
3 - Multi Function Panel Lifter
Lifting resin impregnated or plastic faced panels up to 3.2m x 1.2m weighing 500kgs, this vacuum lifter is capable of 90° powered tilt and 360° power rotation.
4 - Panel Vacuum Lifting Beam - 180° Rotation
Supplied to a large manufacturer of refridgerated vehicles this vacuum lifting beam was designed to lift and turnover 13.6m x 2.6m x 120mm thick weighing 1500kg. Having previously purchased equipment from another company our customer had doubts about safety and requested mechanical safety arms, After using the lifting beam pictured for some months a second lifting beam was ordered. Highly satisfied with the performance of our equipment it was decided that the safety arms were not required.
5 - Panel Vacuum Lifting Beam - 180° Rotation
Similar to the previous example this panel vacuum lifter was required to lift panels from the inside surface. The vacuum pads had to fit in a limited area. The lifter is capable of lifting & rotating 13.6m x 3.5m panels up to 1500kgs.
6 - Telescopic Cladding Panel Lifting Beam
Profiled cladding panels up to 12200mm x 3100mm weighing 1100 kgs are handled by this telescopic vacuum beam.
7 - Aluminium Panel & Skin Vacuum Lifter
Lifting thin aluminium sheets and honeycomb panels 9m long x 2.4m wide from 0.8mm to 100mm thick, this battery powered panel lifter was supplied to be used in conjunction with a reach truck.
8 - Aluminium Panel & Skin Vacuum Lifter
An electro mechanical actuator enables the panel or skin to lifted in both horizontal and vertical planes. The frame was designed with removable end sections to suit the customers panel build jig restrictions on smaller panels.- Panel & Board Lifters
We manufacture panel and board lifters of all sizes. Materials such as plywood, chipboard, cladding and glass reinforced plastics can all be handled safely using our products.
Click each thumbnail image to view.
